Summary
The following formulas were used in the chapter Components 2:
Inductance
\[
\begin{gathered}
L = \mu_0 \mu_r \cdot N^2 \cdot \frac{A_{\mathrm{Kern}}}{l_{\mathrm{Kern}}} \\[6pt]
\mu_0 = 4\pi \cdot 10^{-7}\,\frac{\mathrm{Vs}}{\mathrm{Am}}\text{: natural constant} \\[6pt]
U_L(\omega) = j\omega L \cdot I_L(\omega) \\[6pt]
\text{Impedance: } Z_L = j\omega L
\end{gathered}
\]
Equivalent Circuit
\[
\begin{gathered}
R_{\mathrm{Draht}} = \rho \cdot \frac{l_{\mathrm{Draht}}}{A_{\mathrm{Draht}}} \\[6pt]
C = \varepsilon_0 \varepsilon_r \cdot \frac{A}{d} \text{ with } A\text{: area between the wires, } d\text{: distance between the wires} \\[6pt]
Z_L = j\omega L \text{ increases with } f;\quad Z_C = \frac{1}{j\omega C} \text{ decreases with } f
\end{gathered}
\]
MOSFETs
\[
\begin{gathered}
\text{NMOS operating modes} \\[6pt]
U_{DS} > 0\,\mathrm{V} \text{ and } U_{GS} > U_{TH} \rightarrow \text{switch closed, } I_D \text{ positive} \\[6pt]
U_{DS} > 0\,\mathrm{V} \text{ and } U_{GS} < U_{TH} \rightarrow \text{switch open, } I_D = 0\,\mathrm{A}
\end{gathered}
\]
PMOS
\[
\begin{gathered}
\text{PMOS operating modes} \\[6pt]
U_{DS} < 0\,\mathrm{V} \text{ and } U_{GS} < -U_{TH} \rightarrow \text{switch closed, } I_D \text{ positive} \\[6pt]
U_{DS} < 0\,\mathrm{V} \text{ and } U_{GS} > -U_{TH} \rightarrow \text{switch open, } I_D = 0\,\mathrm{A}
\end{gathered}
\]
Calculating the Losses
\[
\begin{gathered}
\text{MOSFET: } P_{\mathrm{Stat}} = k \cdot R_{DS,\mathrm{On}} \cdot I_{\mathrm{Last}}^2 \\[6pt]
\text{IGBT: } P_{\mathrm{Stat}} = k \cdot U_{CE,\mathrm{SAT}} \cdot I_{\mathrm{Last}} \\[6pt]
\text{Diode: } P_{\mathrm{Stat}} = k \cdot U_F \cdot I_{\mathrm{Last}} \\[6pt]
k\ [0 \ldots 1]\text{: fraction of time during which the switch carries current} \\[6pt]
P_{\mathrm{Dyn}} = f_{\mathrm{Schalt}} \cdot \left(E_{\mathrm{On}} + E_{\mathrm{Off}}\right) \text{ with } E_{\mathrm{On}}\text{: turn-on energy, } E_{\mathrm{Off}}\text{: turn-off energy} \\[6pt]
P_{\mathrm{Ges}} = P_{\mathrm{Stat}} + P_{\mathrm{Dyn}} \\[6pt]
P_{\mathrm{Quelle}} = P_{\mathrm{Schalter}} + P_{\mathrm{Last}} \\[6pt]
\text{Efficiency } \eta = \frac{P_{\mathrm{Aus}}}{P_{\mathrm{Ein}}} = \frac{P_{\mathrm{Last}}}{P_{\mathrm{Quelle}}}
\end{gathered}
\]