Summary: Simplified AC Analysis
The following formulas were used in the chapters on alternating current and simplified AC analysis:
AC Voltage
\[
\begin{gathered}
u(t) = \hat{u} \cdot \sin(\omega t + \varphi) \\[6pt]
i(t) = \hat{\imath} \cdot \sin(\omega t + \varphi) \\[6pt]
T = \frac{1}{f},\ [T] = \mathrm{s} \\[6pt]
f = \frac{1}{T},\ [f] = \mathrm{Hz} = \frac{1}{\mathrm{s}} \\[6pt]
\omega = 2\pi f = \frac{2\pi}{T} \\[6pt]
\varphi = -\frac{\Delta t}{T} \cdot 2\pi
\end{gathered}
\]
Networks with Resistors
Resistor networks are calculated with the peak values just like with DC quantities:
\[
\begin{gathered}
\hat{\imath}_0 = \frac{\hat{u}_0}{R_{\mathrm{Ges}}} \\[6pt]
\hat{u}_1 = R_1 \cdot \hat{\imath}_0
\end{gathered}
\]
AC with Storage Elements
\[
\begin{gathered}
\int \sin(a \cdot t)\,dt = \frac{1}{a} \left[-\cos(a \cdot t)\right] \\[6pt]
\frac{d}{dt} \left[\sin(a \cdot t)\right] = a \cdot \cos(a \cdot t) \\[6pt]
\sin(\omega t) = \cos\left(\omega t - \frac{\pi}{2}\right) \\[6pt]
\cos(\omega t) = \sin\left(\omega t + \frac{\pi}{2}\right) \\[6pt]
\text{Peak values: } \hat{u}_S = \sqrt{(\hat{u}_1)^2 + (\hat{u}_2)^2}
\end{gathered}
\]
The last formula applies to the sum of a sine and a cosine quantity of the same frequency.
Capacitor and Inductor
\[
\begin{gathered}
\text{Resistor: } \hat{u}_R = R \cdot \hat{\imath}_R \\[6pt]
\text{Capacitor: } \hat{u}_C = X_C \cdot \hat{\imath}_C \text{ with } X_C = \frac{1}{\omega C} \\[6pt]
\text{Inductor: } \hat{u}_L = X_L \cdot \hat{\imath}_L \text{ with } X_L = \omega L
\end{gathered}
\]
Calculating with Reactances
\[
\begin{gathered}
i(t) = \hat{\imath} \cdot \sin(\omega t) \rightarrow u_C(t) = -\hat{u}_C \cdot \cos(\omega t),\quad u_L(t) = \hat{u}_L \cdot \cos(\omega t) \\[10pt]
\text{Series connection: } X_{\mathrm{Ges}} = \sqrt{R^2 + X_C^2} \text{ or } X_{\mathrm{Ges}} = \sqrt{R^2 + X_L^2} \\[6pt]
\text{Parallel connection: } X_{\mathrm{Ges}} = \frac{R \cdot X_C}{\sqrt{R^2 + X_C^2}} \text{ or } X_{\mathrm{Ges}} = \frac{R \cdot X_L}{\sqrt{R^2 + X_L^2}} \\[10pt]
\text{Series connection: } X_{\mathrm{Ges}} = X_L - X_C \\[6pt]
\text{Parallel connection: } X_{\mathrm{Ges}} = \frac{X_L \cdot X_C}{X_L - X_C}
\end{gathered}
\]
The upper two lines apply to a resistor with a capacitor or an inductor, the lower two to an inductor and a capacitor.
Simplified Frequency Dependence
\[
\begin{gathered}
\text{For } f = 0\,\mathrm{Hz}\text{: } X_L = 0\,\Omega \text{ and } X_C \rightarrow \infty \\[6pt]
\text{For } f \rightarrow \infty\text{: } X_L \rightarrow \infty \text{ and } X_C \rightarrow 0\,\Omega
\end{gathered}
\]
Simplified Water Model
\[
\begin{gathered}
\text{Fill level } h \text{ corresponds to voltage } u_C \\[4pt]
\text{Inflow rate } \dot{v} \text{ corresponds to current } i_C \\[4pt]
\text{Base area } A \text{ corresponds to capacitance } C \\[6pt]
\text{Overall: } h = \frac{1}{\omega A} \cdot \dot{v} \\[6pt]
\text{Capacitor: } \hat{u}_C \sim \frac{1}{\omega C} \cdot \hat{\imath}_C
\end{gathered}
\]