Learning Content and Theses

Platform for digital learning at HSHL

Summary: Powering Circuits

The following formulas were used in the chapter on powering circuits:

Battery Technologies

Maximum output current of a battery (chapter Real Sources):

\[ I_{\max} = n \cdot \frac{C}{h} \]

Connecting Batteries

Equalizing current when connecting two batteries with different voltages in parallel:

\[ \begin{gathered} I = \frac{U_{\mathrm{Akku1}} - U_{\mathrm{Akku2}}}{R_{\mathrm{innen1}} + R_{\mathrm{innen2}}} \\[10pt] \text{Limitation with a resistor while connecting in parallel:} \\[4pt] R_{\mathrm{Ges}} = R_{\mathrm{Vor}} + 2 \cdot R_{\mathrm{innen}} \approx R_{\mathrm{Vor}} \\[6pt] I = \frac{U_{\mathrm{Akku1}} - U_{\mathrm{Akku2}}}{R_{\mathrm{Vor}}} \end{gathered} \]

Adapting Voltages

Linear regulator (LDO):

\[ \begin{gathered} \text{Mesh equation: } U_{\mathrm{Akku}} = U_{\mathrm{Dropout}} + U_{\mathrm{Last}} \\[6pt] \text{Series connection: } I_{\mathrm{Akku}} = I_{\mathrm{LDO}} = I_{\mathrm{Last}} \\[6pt] \text{Power: } P_{\mathrm{Akku}} = P_{\mathrm{LDO}} + P_{\mathrm{Last}} \\[6pt] P_{\mathrm{LDO}} = U_{\mathrm{Dropout}} \cdot I_{\mathrm{LDO}} \\[6pt] \text{Efficiency } \eta = \frac{P_{\mathrm{Last}}}{P_{\mathrm{Akkus}}} \end{gathered} \]

DC/DC converter with efficiency η:

\[ \begin{gathered} P_{\mathrm{Ein}} = \frac{P_{\mathrm{Aus}}}{\eta} \\[6pt] \text{Input current } I_{\mathrm{Ein}} = \frac{P_{\mathrm{Ein}}}{U_{\mathrm{Ein}}} \end{gathered} \]

Download course as PDF

The PDF contains all pages of the course. Interactive content is only available on the website.